Jeep T150620-W5A580 Transmission
JEEP T150620-W5A580 TRANSMISSION 2011
Remanufactured Zero Mile Transmissions
VIN NUMBER REQUIRED FOR AN ACCURATE QUOTE
Get Your BUAP Quick Quote
Part Type: Remanufactured Transmission (Factory Spec / High Durability)
This Jeep T150620-W5A580 transmission is remanufactured with the HIGHEST QUALITY PARTS AVAILABLE.
The Jeep T150620-W5A580 transmission is a 5-speed automatic transmission that was used in select Jeep models for the year 2011. This transmission features an all-aluminum case and extension housing, and it is hydraulically controlled with electronic shift control. It also includes overdrive and lock-up torque converter features for improved efficiency and performance.
The transmission specifications for the Jeep T150620-W5A580 include gear ratios of 2.45:1 for 1st gear, 1.45:1 for 2nd gear, 1.00:1 for 3rd gear, and 0.69:1 for 4th gear. It has a 6-bolt hexagon bolt pattern and a transmission length of approximately 23.3 inches (593 mm). The weight of the transmission ranges from 200 to 300 pounds (91 to 136 kg), and it is rated to handle up to 700 lb-ft (949 Nm) of torque.
The Jeep T150620-W5A580 transmission was used exclusively in Jeep models for the year 2011. It was designed to provide smooth shifting and efficient performance, making it suitable for various driving conditions. The 5-speed configuration allowed for a good balance between performance and fuel efficiency. However, it’s important to note that transmission options and availability can vary by specific Jeep models and production dates, so it’s always best to verify with the manufacturer or consult the owner’s manual for accurate and up-to-date information.
IF YOU DON’T SEE YOUR VEHICLE – CALL FRASER SALES
The Jeep T150620-W5A580 transmission is commonly used in Jeep models as the 5-speed automatic transmission option. It is also sometimes referred to as the 5-speed automatic transmission with AutoStick. Based on my knowledge cutoff date of September 2021, this transmission has been used in various Jeep models over the years, including:
- Jeep Wrangler (JK): 2007-2011
- Jeep Wrangler (JKU): 2007-2011
- Jeep Grand Cherokee (WK): 2005-2010
- Jeep Commander (XK): 2006-2010
- Jeep Liberty (KK): 2008-2012
Please note that vehicle models and transmissions can change over time, and it’s always best to verify specific information with the manufacturer or consult the owner’s manual of the vehicle in question for the most accurate and up-to-date information.
A core deposit is a charge added to the purchase of most engines or transmissions. We use the term “deposit” because once your new part is installed, we’ll graciously pick-up your old engine or transmission free of charge and then refund the core deposit you paid
BUAP ADVANTAGE
Part No. FET150620RR-HD
Remanufactured, High Durability Transmission.
Stronger than OEM.
All OEM Updates & Upgrades Included. Zero Miles.
Warranty: 5 Year / Unlimited Miles
Shipping: To Be Determined / Call for Rates
Core Deposit: $1000.00
BUAP Advantage Transmission Quality Checks
- All transmissions are completely disassembled and cleaned.
- All cases are media blasted.
- Internal parts are inspected for wear or damage and replaced as required.
- All bushings are inspected and replaced as required.
- 100% of friction components are replaced with upgraded heavy duty parts.
- Drum assemblies are air checked and side play is checked to assure proper clearance.
- 100% of seals, o’rings and gaskets are replaced.
- 100% of solenoids are checked and replaced if they do not pass duty cycle tests.
- Internal wiring harnesses are checked and replaced as necessary.
- Valve bodies are disassembled, cleaned, and measured for wear.
- Valve body valves and valve bores are inspected and valve bores are machined as required.
- Completed valve bodies are tested for proper operation prior to dyno testing.
- Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
- 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converted stall speed and lockup is verified on the dynamo test. Transmission park locking mechanism is checked during dyno test.
BUAP Advantage Torque Converter
- 100% of converters are dynamic balanced.
- 100% of pumps are furnaced brazed.
- 100% new bearings & o’rings.
- 100% new springs & rollers in stator.
- 100% new thrust washers.
- 100% new fiction liners in overdrive lockup converters.
- Converter endplay & hub/pump runout & diameter is checked.
UNIT COST: $2695.00
UPGRADE OPTIONS
ADDONS – Fluid – Add+$99.99
WARRANTY – No-Fault Warranty Upgrade – Call