3.3L KIA / HYUNDAI ENGINE FOR SALE
FITS KIA, HYUNDAI (2005 - 2022)
3.3L KIA / HYUNDAI REMANUFACTURED ENGINE
ZERO MILES - ALL UPDATES APPLIED
$ 6499.00
- PART NUMBER: FEC33KH
- Core Deposit - $500.00 (fully refundable)
- Shipping (round trip) - $500.00
- Warranty - 1 Year / UNLIMITED Miles (upgrades available see below)
- TOTAL: $6499.00 + CORE + SHIPPING
Engine Block
✅ New Updated Timing Components
✅ New Updated Pistons
✅ New Updated Level II Lifters (TSB Updates from 2015)
✅ New Connecting Rods
✅ Remanufactured & Updated Cylinder Heads (TSB Updates From 2017)
✅ Premium Gasket Set
✅ Updated Oil Pump
This engine is built back to original OEM specifications with ALL UPDATES applied.
TINWARE (Oil Pan, Timing Cover, Oil Sump) – $349.00
ADD PREMIUM INSTALLATION KIT – $249.00
INSTALLATION KIT INCLUDES:
- Water Pump
- Thermostat
- Air Filter
- Oil Filter
- Spark Plugs
- Plug Wires or Boots
- Belts
- Hoses
INSTALLATION KITS VARY PER APPLICATION
The BUAP ADVANTAGE™ Engine Re-manufacturing Process
STEP 1) ENGINE BLOCK DISASSEMBLY
Our journey begins with a thorough visual inspection of each engine block for casting defects. We meticulously disassemble the components, inspecting each part for damage and identifying the cause of failure. We remove oil and water passage plugs to guarantee optimal results during thermal cleaning. We select only premium castings for our marine blocks, insisting on replacements in all salt-water applications. For high-performance engines, we utilize premium cores, never employing repaired castings or sleeved blocks, preserving the authenticity of your classic car’s original block casting with our skilled technicians’ craftsmanship.
STEP 2) ENGINE BLOCK THERMAL CLEANING
We elevate engine parts to a new level of clean with our thermal cleaning system. This process evenly distributes heat throughout the chamber, avoiding overheating or warping. Components are heated in an oxygen-deficient atmosphere, decomposing combustible hydrocarbons and leaving parts dry. We use the Ace RKE 230 oven exclusively for cast iron blocks, ensuring ash residue is effortlessly removed in the subsequent stainless steel shot blasting phase.
STEP 3) ENGINE BLOCK SHOT BLASTING
Our shot-blasting method employs stainless steel shot to remove surface contamination like rust, creating a smoother finish. This step is vital for detecting surface and subsurface defects during quality inspection. The peening process imparts compression strength to the metal, preparing it for a preliminary defect inspection.
STEP 4) ENGINE BLOCK MAGNAFLUXING
We use magnetic particle inspection to detect cracks and imperfections in ferrous engine parts, ensuring the highest quality for our cast iron blocks. Before proceeding to aluminum blocks, we explain their specific cleaning, testing, and defect checking processes.
STEP 5) ENGINE BLOCK HIGH PRESSURE WASH
Aluminum engine blocks first encounter our AXE SW20 OS spray cleaning system, which removes all foreign material with its powerful spraying action and multi-integrated nozzles. This step is crucial for a thorough inspection.
STEP 6) ENGINE BLOCK SONIC CLEANING
We use ultrasonic cleaning for aluminum blocks, known as the benchmark in cleanliness. This method reaches inaccessible areas, breaking the bonds that hold small particles to surfaces. Post-cleaning, the block undergoes pressure testing.
STEP 7) ENGINE BLOCK PRESSURE TESTING
We employ the Delta Pressure tester to double-check for pinholes after magnafluxing and dye testing, ensuring the integrity of all castings used in our products.
STEP 8) ENGINE BLOCK PREPARATION
After a complete visual inspection, we repair minor casting defects, remove broken bolts, tap threads, and perform gasket surface repairs to minimize stock removal.
STEP 9) ENGINE BLOCK MACHINING
We use the RMC CNC V40 enclosed machining center for precise and versatile machining. This computerized machine measures and levels blocks, measures deck heights & cylinder bore sizes, eliminating operator error. Our machine determines Ra finish based on block type and gasket used, utilizing CBN cutters and checking surface finish with the Mitutoyo SJ-301.
STEP 10) ENGINE BLOCK ROD RECONDITIONING
The Sunnen LBB-1600 Hone, measuring accuracy within .0001″, is our choice for precision rod reconditioning and pin fitting, ensuring honed bores equal to or better than new rods. High-performance engines are fitted with ARP high-strength bolts and nuts prior to this step.
STEP 11) ENGINE BLOCK HONING
After precise machining, our blocks undergo a second high-pressure wash cycle, ensuring absolute cleanliness for final assembly.
STEP 12) ENGINE BLOCK HIGH PRESSURE WASH
After precise machining, our blocks undergo a second high-pressure wash cycle, ensuring absolute cleanliness for final assembly.
STEP 13) ENGINE BLOCK SONIC CLEANING
We ultrasonically clean all parts prior to assembly, ensuring the ultimate cleanliness level. This method reaches every surface and internal area, providing the cleaning force required for the most stringent standards.
STEP 14) ENGINE BLOCK ASSEMBLY
Each assembler at Buap Engines conducts a thorough visual inspection and measures parts for proper size. We fit blocks with new cam bearings, oil restrictors, relief valves, new water and oil plugs, and more. Cylinder heads are installed with new bolts and gaskets, and each cylinder’s seal integrity is checked. The final inspection by our assembly manager ensures the highest quality for your remanufactured engine.
Buap Engines is committed to delivering engines of exceptional quality and performance. Our rigorous, detailed remanufacturing process ensures every engine we deliver meets our high standards and exceeds your expectations.
THE GOLD STANDARD IN ENGINE REMANUFACTURING
1.) The COMEC ACF200
At Buap Engines, we embrace cutting-edge technology to ensure that every engine we remanufacture meets the highest standards of quality and performance. A cornerstone of our state-of-the-art machinery is the ACF200 Cylinder Boring-Resurfacing Machine. This sophisticated equipment plays a pivotal role in our engine rebuilding process, allowing us to deliver products that consistently exceed expectations.
Precision Engineered for Excellence
The ACF200 is renowned for its precision and versatility. Our skilled technicians utilize this machine’s advanced capabilities to perform intricate machining tasks with unmatched accuracy.
- Dual Functionality: Boring and resurfacing are critical steps in engine remanufacturing. The ACF200 excels in both, ensuring that each cylinder bore is machined to perfection and that every surface finish meets stringent specifications.
- Unrivaled Accuracy: The ACF200’s precision engineering allows us to achieve the tight tolerances required for modern engines. This precision is not just about meeting specifications; it’s about ensuring the longevity and reliability of each Buap Engine.
- Adaptable to All Engine Types: The versatility of the ACF200 means that no engine is beyond our capability. Whether dealing with compact car engines or heavy-duty truck engines, our machine handles them all, making it an invaluable asset in our remanufacturing process.
The Buap Engines Advantage
Incorporating the ACF200 into our remanufacturing process allows us to offer several distinct advantages:
Meticulous Cylinder Machining: Each engine’s cylinders are bored and honed to exact dimensions, ensuring optimal fit and function. This meticulous attention to detail is crucial for the engine’s performance and the vehicle’s overall efficiency.
Flawless Surface Finishing: Proper head gasket sealing is paramount in engine rebuilding. The ACF200 enables us to resurface engine blocks and cylinder heads to precise specifications, ensuring a perfect seal and reliable performance.
Assured Quality and Performance: With the ACF200’s precision, every engine remanufactured at Buap Engines is a testament to our commitment to quality. We don’t just rebuild engines; we enhance them, setting new benchmarks for performance and reliability in the remanufacturing industry.
2.) CNC Crankshaft Grinder
At Buap Engines, we pride ourselves on being at the forefront of remanufacturing innovation, and our CNC Crankshaft Grinder stands as a testament to this commitment. As a leading remanufacturer, we boast the utilization of CNC Crank Grinders, a technology that sets us apart and reinforces our position as an industry pioneer in the United States.
Cutting-Edge Technology in Every Turn
Our CNC Crankshaft Grinder represents the pinnacle of modern engineering, bringing the precision of fully automated production processes, typically exclusive to OEM plants, into our remanufacturing workflow.
One-Chucking Complete Grinding: Designed for efficiency and excellence, the CNC Crankshaft Grinder performs complete grinding of crankshafts in a single chucking. This advanced approach ensures consistency and precision throughout the entire process.
Unmatched Precision and Quality: The machine’s capabilities extend far beyond the current industry standards, offering:
- Stabilized Dimensional Accuracy: Every crankshaft remanufactured at Buap Engines benefits from unparalleled precision, maintaining exacting specifications for every component.
- Superior Surface Quality: The CNC Crankshaft Grinder delivers a finish of the highest quality, ensuring each crankshaft’s longevity and performance.
- Tighter Tolerances: With the advanced technology of our CNC Crankshaft Grinder, we achieve and consistently maintain the tightest tolerances, ensuring each remanufactured crankshaft meets rigorous standards.
3.) Flame Spray Technology
At Buap Engines, we’re committed to innovation and excellence in every facet of our remanufacturing process. Our continuous pursuit of improvement and our investment in the latest technologies underscore this commitment. A shining example of our forward-thinking approach is the integration of state-of-the-art flame spray technology into our operations.
Pioneering with Flame Spray
Recently, Buap Engines has taken a significant leap forward by incorporating the latest flame spray machine into our remanufacturing facilities. Installed and fully operational since 2016, this technology marks a new era in our production capabilities.
Setting New Standards in Finish Quality: The flame spray machine elevates our ability to meet and exceed the finish requirements for engine block cylinder bores. With this technology, Buap Engines effortlessly surpasses the industry benchmarks for remanufacturing current model year engines.
Unparalleled Precision and Durability: Flame spray technology allows us to apply coatings with unmatched precision and uniformity, ensuring each engine block’s durability and performance are maximized. This process not only enhances the quality of the finished product but also extends the lifespan of the engines we remanufacture.
DESCRIPTION
The Ultimate Guide to the 3.3L Kia/Hyundai Engine – Brought to You by Buap Engines
Introduction: When it comes to finding the perfect balance between power, efficiency, and reliability in an engine, the 3.3L V6 from Kia and Hyundai stands out. Buap Engines, your go-to source for premium engine solutions, delves deep into the specifications, features, and applications of this remarkable powertrain. Whether you’re a car enthusiast, a potential buyer, or someone interested in the mechanics of your vehicle, this guide offers everything you need to know about the 3.3L Kia/Hyundai engine.
Engine Overview: The 3.3L V6 engine, part of the Lambda engine family, is a masterpiece of automotive engineering developed by Kia and Hyundai. Known for its aluminum construction, this engine offers a lightweight solution without compromising on strength or performance. With dual overhead camshafts and four valves per cylinder, it’s designed for those who demand efficiency and power under the hood.
Key Features:
- Type: V6
- Displacement: 3.3 liters
- Construction: Aluminum block and cylinder heads for reduced weight and improved cooling
- Valvetrain: DOHC with four valves per cylinder, often equipped with variable valve timing
- Fuel System: Advanced fuel injection technologies, including direct injection for better fuel economy and power
- Power Output: Ranges from 242 to over 290 horsepower, catering to a wide variety of driving needs
- Torque: Delivers more than 250 lb-ft of torque for robust performance
Notable Applications: Buap Engines highlights the versatility of the 3.3L engine through its inclusion in several Hyundai and Kia models, such as the Hyundai Santa Fe, Kia Sorento, and Kia Sedona, among others. This engine’s adaptability and performance make it a preferred choice for a range of vehicles, from sedans to SUVs.
Technological Innovations: The 3.3L V6 engine is at the forefront of automotive technology with features like Gasoline Direct Injection (GDI) and Dual Continuously Variable Valve Timing (D-CVVT). These innovations not only enhance the engine’s performance but also contribute to better fuel efficiency and lower emissions, making it a forward-thinking choice for today’s eco-conscious drivers.
Reliability and Performance: Buap Engines emphasizes the reliability of the 3.3L Kia/Hyundai engine, a result of years of innovation and testing. While maintaining regular service schedules is recommended for optimal performance, this engine has proven to be a dependable heart for many vehicles, offering a smooth and powerful driving experience.
Conclusion: The 3.3L Kia/Hyundai V6 engine is a testament to the engineering prowess of Kia and Hyundai, embodying the qualities many drivers seek: efficiency, power, and reliability. At Buap Engines, we’re proud to provide detailed insights and solutions related to this exceptional engine. Whether you’re in the market for an engine that combines performance with practicality or simply seeking information, Buap Engines is your premier resource for all things related to the 3.3L Kia/Hyundai engine.
TECH UPDATES
- Bore and hone all cylinders to OEM clearances, ensuring precision within .0001 of an inch.
- Decking of cylinder head(s) and block for optimal straightness.
- Cutting valve seats and valves to the proper degree.
- Line boring and honing of crankshaft/camshaft tunnels for enhanced durability.
- Ground and polished crankshaft, coupled with a new or remanufactured camshaft(s) for improved performance.
- Installation of new main bearings, rod bearings, pistons, piston rings, lifters, pushrods (if equipped), timing components, oil pump, and head bolts.
Expertly Remanufactured 3.3L KIA, HYUNDAI Engines by Buap Engines & Transmissions
Buap Engines & Transmissions is your trusted partner for 3.3L KIA, HYUNDAI engine remanufacturing, offering unmatched quality and performance. Our state-of-the-art remanufacturing process involves precision engineering and the use of high-grade materials, ensuring each engine surpasses original specifications for durability and reliability.
Comprehensive Warranty Support for Your Peace of Mind
We back our remanufactured 3.3L KIA, HYUNDAI with an industry-leading warranty, reflecting our commitment to quality and customer satisfaction. This robust warranty coverage is our guarantee of reliability, offering you peace of mind with every purchase.
Tailored Consultation to Match Your Vehicle’s Needs
Our team of experts is dedicated to providing personalized consultation services, ensuring that your 3.3L KIA, HYUNDAI engine selection is perfectly aligned with your vehicle’s performance requirements. We focus on understanding your needs to recommend the best engine solution, promising optimal performance and seamless integration.
Transform Your Vehicle with a Remanufactured 3.3L KIA, HYUNDAI Engine
Opting for a remanufactured 3.3L KIA, HYUNDAI engine from Buap Engines & Transmissions means choosing an upgrade that enhances your vehicle’s efficiency, power, and reliability. Explore our selection of premium remanufactured engines today and take the first step towards a superior driving experience.
VEHICLE FITMENTS
IF YOU DON’T SEE YOUR VEHICLE – CALL BUAP SALES
- Hyundai Azera – Offering a blend of luxury and performance, the Azera benefits from the power and smoothness of the 3.3L engine.
- Hyundai Santa Fe – This popular SUV uses the 3.3L engine to provide a reliable and comfortable driving experience, suitable for families and adventurers alike.
- Hyundai Genesis (later models rebranded as Genesis) – The Genesis sedan showcases the 3.3L engine’s capability in delivering premium performance and driving dynamics.
- Kia Sorento – A versatile SUV that balances power and efficiency with the help of the 3.3L engine, making it ideal for both city driving and off-road adventures.
- Kia Sedona – The Sedona minivan utilizes the 3.3L engine to offer a smooth and responsive ride, ensuring comfort and reliability for long journeys.
- Kia Cadenza – This executive sedan benefits from the refined power of the 3.3L engine, providing an elegant and efficient driving experience.
- Kia Stinger – Although more known for its 2.0L turbocharged and 3.3L twin-turbocharged versions, the Stinger’s use of a powerful V6 engine variant underscores Kia’s commitment to performance and innovation.
3.3L Kia/Hyundai Engine Specifications
Overview: The 3.3L V6 engine, developed by Kia and Hyundai, is part of the renowned Lambda engine family. Designed with precision and engineered for performance, this powertrain stands out in its class for its balance of efficiency, power, and reliability. Employing advanced technology and high-quality materials, the 3.3L engine delivers an exceptional driving experience across a range of models from both brands.
Engine Type:
- V6
Displacement:
- 3.3 Liters
Construction:
- Block Material: Aluminum
- Cylinder Head Material: Aluminum
Valvetrain:
- Dual Overhead Camshafts (DOHC)
- Four valves per cylinder
- Variable Valve Timing (VVT) technology
Fuel System:
- Multi-Point Fuel Injection (MPFI) or Gasoline Direct Injection (GDI) depending on model and year
Power Output:
- Range: 242 to 294 Horsepower (HP)
Torque:
- Range: 225 to 260 Pound-Feet (lb-ft)
Features:
- High-pressure die-cast aluminum block for reduced weight and enhanced thermal efficiency
- Hydraulic engine mounts for reduced vibration and noise
- Integrated exhaust manifolds and a compact intake system to improve engine responsiveness and efficiency
Notable Applications:
- Hyundai Azera
- Hyundai Santa Fe
- Hyundai Genesis
- Kia Sorento
- Kia Sedona
- Kia Cadenza
Technological Highlights:
- The 3.3L engine features cutting-edge advancements such as Gasoline Direct Injection (GDI) technology in later models, improving fuel efficiency and performance.
- Dual Continuously Variable Valve Timing (D-CVVT) optimizes valve timing for both intake and exhaust, enhancing power delivery and fuel economy.
- A high compression ratio is employed to increase efficiency and power output.
Environmental Compliance:
- The engine is designed to meet stringent emissions standards, incorporating advanced catalytic converters and engine management systems to reduce emissions.
Maintenance and Reliability:
- Recommended Oil: Synthetic 5W-30
- Service Interval: Refer to the vehicle’s owner’s manual for specific maintenance recommendations.
- Warranty: Hyundai and Kia offer comprehensive warranties for the engine, underscoring its reliability. Refer to the manufacturer’s documentation for details.
BREAK-IN PROCEDURE
Use conventional or break-in oil (non-synthetic) for the first 600 miles of operation. Do not drive for long periods at any single speed, always vary your speed. Do not tow a trailer or put other heavy loads on the vehicle. Check the engine oil and coolant levels daily.
At 600 Miles change the engine oil and filter using conventional (non-synthetic) oil. Check fuel and ignition settings; adjust valves (where applicable).